TIMKEN® Automotive Wheel Bearing Lubricating Grease 1 lb Tub - GR224T

Part Number: GR224T
Take the guesswork out of choosing the right grease for your disc and drum bearing applications. Use Timken® automotive wheel bearing grease, a premium high-temperature red grease designed for construction, agriculture and automotive applications.

 Beyond excellent wear protection, this high-temperature grease features a lithium complex thickener, which resists softening and provides the mechanical stability required for demanding applications.

Timken leveraged our knowledge of anti-friction bearings, lubricants and wheel-end systems, to develop this multi-application grease. Timken® automotive wheel bearing grease contains corrosion inhibitors and anti wear and water-resistant additives for stronger performance in even the most challenging environments.

TIMKEN Automotive Wheel Bearing Grease is an NLGI No. 2 lithium complex lubricating grease for light to medium duty applications. This product has good high temperature characteristics and contains extreme pressure and anti-wear additives as well as corrosion inhibitors to provide protection in a variety of automotive applications. TIMKEN Automotive Wheel Bearing Grease meets the requirements for extended lubrication intervals of automotive chassis points and wheel bearings with disc brakes. TIMKEN Automotive Wheel Bearing Grease meets NLGI certification GC-LB.

TIMKEN Automotive Wheel Bearing Grease can be applied from ambient temperatures of - 18° F to + 300° F (- 28° C to + 149° C) depending on lubrication system design and method of application. TIMKEN Automotive Wheel Bearing Grease has an operating temperature range of - 40° F to + 300° F (- 40° C to + 149° C) once in the application. Follow equipment manufacturer’s recommendations concerning lubrication frequencies. 

• Color: Red
• NLGI Grade: No. 2
• Thickener Type: Lithium Complex
• Penetration, Unworked, ASTM D 217: 265-295 
• Penetration, Worked 60 Strokes, ASTM D 217: 285
• Wheel Bearing, ASTM D 1263: 5 Grams Max.  
• Dropping Point, ASTM D 2265: 280° C Min.  
• Oxidation Stability, ASTM D 942, 100 hours at 99° C: 3 psi  
• Four-Ball Wear, ASTM D 2266, 40 kg, 1200 RPM, 75° C, Scar mm: 0.50 Max.  
• Four-Ball EP, Weld Point, ASTM D 2596, kgf : 400 Min.  
• Timken OK Load, ASTM D 2509, Pounds: 65  
• Copper Strip Corrosion, ASTM D 4048: 1b  
• Corrosion Preventive Properties, ASTM D 174: Pass  
• Oil Separation, ASTM D 1742: 1 % Max.  
• Viscosity @ 100° C, ASTM D 445, Centistokes: 14 
• Viscosity @ 40° C, ASTM D 445, Centistokes: 143
• Viscosity Index: 94
• Pour Point, ASTM D 97: 20°C 
• Flash Point, ASTM D 92: 235° C